POWER DISTRIBUTION FRAME

Power Distribution Frame is a -48V / 320A system earthed to positive used to supply telecommunication equipment with direct current. The system is intended for use in applications where a power plant with low ohmic distribution supplies power to transient sensitive equipments, such as electronic telecom equipments. It limits the current during short circuit at any of the distributed outputs. If a short circuit occurs at any of the output, the voltage at all other outputs will remain unchanged i.e. within the specified limit.

Download Brochure

STATIC/SERVO VOLTAGE STABILIZER

The performance of any electrical/electronic equipment is optimum at its rated voltage. Under voltage reduces efficiency or damage valuable appliances incorporating motor/compressor system (e.g. Refrigerator, Air Conditioner & Computerized Sewing Machine, whereas over voltage may damage electronic equipment/appliances like television computers, CNC Machines, Telecommunications centers, Medical Equipment.

LCU offers complete solution for Power problems through Automatic Voltage Correction, Power Protection & Surge.

 

 

 

Download Brochure

   

ISOALTION TRANSFORMER

  

All transformers provide isolation. They are generally constructed with a primary and secondary winding closely wrapped about the same magnetic core.

Transformers have capacitance from a winding to any nearby Conductor, such as other winding, the wire and the chassis. Thus they can couple high frequency signals and noise to these near by conductors. This capacitive coupling mechanism can carry high frequency noise from the input primary to the output secondary winding or vice versa. Isolation transformers minimize this capacitive coupling.

Capacitive Coupling is minimized by specialized construction and use of shields. Shields usually increase the capacitance coupling between primary and secondary if the shield is not connected to the appropriate place. The technique lies in connecting the shields at a place where noise is diverted to harmless place. Isolation levels upto 120 dB can be provided.

Download Brochure
SMPS POWER PLANT 48V/3X50A  

INTRODUCTION

The power plant ensures the uninterrupted supply of DC current to DC equipment when batteries are connected to it. The rectifier modules are designed to convert the sinusoidal alternating current from the primary mains supply into direct current and to deliver it to the equipment and, in parallel, to the batteries. Batteries connected to the power plant stores energy in order to be able to deliver it back to the equipment in case of primary mains supply become unavailable.

Download Brochure



 

PHASE & NEUTRAL BALANCING SYSTEMS

INTRODUCTION

Voltage fluctuation problems are quite common in most of the countries in the world, particularly in India. A Three Phase Power System when unevenly loaded it causes different phase - neutral voltages and a heavy current in the neutral conductor. Due to dynamic nature of single-phase loads / utility it is not possible to rearrange the configuration of the system to make it symmetrical. To overcome these problems, Phase & Neutral Balancing System is a complete solution.

Download Brochure

TELECOM SHELTER WITH ADVANCE THERMAL MANAGEMENT SYSTEM

Telecom Shelter is an innovative solution that utilizes FRP to offer better thermal resistance for solar gain and now almost the entire Telecom industry has accepted the versatility of Telecom Shelter and thousands of Green units have deployed at Telecom sites.

When a substance changes from solid to liquid or liquid to solid (i.e. Changes Phase), a large amount of energy in the form of latent heat is required. This high latent heat energy occurs at a relatively constant temperature.

Download Brochure

 

Home | Profile | R & D | Concept | Services | Products | Careers | Contact Us

PRAGATI ELECTROCOM (P) LTD. PLOT No. 184 SECTOR-3, IMT MANESAR,PHASE -I, GURGAON-122050 (HARYANA) INDIA

Telephone: +91-124-2291480, 2291456  FAX: +91-124-2291479 E-MAIL: info@pragatielectrocom.com